Image
Image
Image

SPS Motorsport

Mazda dans toutes les compétitions automobiles à travers le monde

Modérateurs : dayvid971, zeeplin, petit spirou, wormlord, cygoris

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 02 déc. 2019 15:31

Here we have one of a rarer conversion, a rotrex C15-60 supercharger. The 1.8L BP engine produces 200 hp with 242 Nm/178 lbft torque. It also has a Stoptech Big Brake Kit, some 15" Rota Grid wheels with Federal 595 RS-R tires in 205/50 ZR15, a SPS "Extreme" rollbar, a race header, a mishimoto radiator and our coilover setup.

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 13 déc. 2019 17:18

Here You can see a really serious project.

This NC is getting a Borg Warner EFR7163 turbocharger on a forged engine running with 1.3 bar boost tuned with a MS3. It will produce around 400hp at the flywheel with 455Nm/336lbft torque.
It also gets a full roll cage, fender flares, gearbox oil cooling system and differential oil cooling system.

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 21 janv. 2020 10:27

Hello guys,

the first post in 2020, this time something special.

We also restore complete cars. The customer made the decision to restore his car completely from zero to the top.
It gets a new painting, new seals, new gaskets, new rubbers, a new windshield, a rollbar, Lotus Elise seats, a turboconversion (Borg Warner EFR 6758), a SPS coilover setup, and some nice wheels and tires.

We are filming the whole process and creating a time lapse video.

Image

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 27 févr. 2020 08:57

Some days ago we had a really nice looking ND here. We mounted Rota Kyusha 9x17" with 20mm offset on Hankook Ventus V12 215/40 ZR17. The suspension is our SPS "Super Low" coilover setup. The last step was mounting a ATH exhaust.

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 02 mars 2020 17:41

And again a really nice ND. This time we installed BBR GTi camshafts with a full exhaust system and tuned the ECU on the dyno. Now car the has 200hp at the flywheel instead of 160hp.
The car also got some nice 17" Rotas, our SPS street coilover setup and Recaro pole position in full leather.

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
ANSYL
Pilote débutant
Messages : 145
Enregistré le : 16 nov. 2016 20:55
Localisation : Suisse

Re: SPS Motorsport

Message par ANSYL » 03 mars 2020 12:01

Hi Guido!
Very nice black RF !!!
The Recaro are very beautiful !!!
Thanks for the pictures !
Mazda 3 MPS quasiment stock
Subaru WRX Rex plus vraiment stock :twisted:

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 16 mars 2020 17:54

This Turbo NA is a more powerful version. A 1.8L BP with forged internals, a Garrett GT3071R turbocharger producing 320hp at the flywheel with 1.2 bar boost.

Some more specs:
Competition Clutch Stage 4
K-Sport coilover setup
StopTech Big Brake Kit
CAE short shifter on a 6-speed gearbox
Reroute Kit
Recaro Profi SPG seats
sparco seat harness
Nardi steering wheel
Rota Grids in 8x15 with 25mm offset
full 3" custom exhaust

Image

Image

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 26 mars 2020 11:24

Hey guys,

we have a special offer for You.

We sell our TD04-Turbokit for the MX-5/Miata NA, NB and NBFL for just 3499€.
On the stock 1.6L You get 220hp at the flywheel, on the stock 1.8L You get 250hp at the flywheel.

The kit contains:
Kraken cast iron manifold
Two-piece downpipe (first part made of cast iron, second part made of stainless steel)
Turbocharger incl. Matching connection accessories
Steelflex oil feed pipe
water pipe
High temperature oil return
Giselwerks Hardpipe boost pressure piping
efficient intercooler
Open air filter
SPS Motorsport 700CC Injectors (calibrated and tested)
Engine control unit with matching basemap
mounting material (incl. spark plugs BKR7EIX and modified washer fluid reservoir)

https://www.youtube.com/watch?v=v18XYMgpjmU&t=0s

https://sps-motorsportshop.com/shop/en/ ... 98-SPECIAL

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 07 avr. 2020 09:40

Hey guys,

just in case You didn't know. We make a sale for Japan Racing rims.
So every Japan Racing rim is 20% cheaper.



https://sps-motorsportshop.com/shop/en/ ... acing/?p=1

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 29 avr. 2020 08:48

One of our bigger projects this year:

This MX-5 ND G184 gets a full engine swap to a 3.7L V6 LFX Camaro engine with transmission. And we use the car to develop a safety rollbar for the MX-5 ND, also to attache 4-point-harnesses.

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 14 mai 2020 08:42

Hey guys,

here we have e really clean an nice looking NA with a Borg Warner EFR6258 turbo conversion on a stock 1.8L BP making 250hp. Also a very cool detail, the 7x14" Enkei RPF1 with 185/60 R14 Nankang NS-2R.

Specs:
- 1.8L BP with EFR6258
- ME221 ECU
- 3" exhaust system
- Enkei RPF1 7x14" 28mm offset with Nankang NS-2R 185/60 R14.
- Xtreme Clutch Stage 1
- BC Racing BR Series coilover setup
- Mishimoto performance radiator
- Sparco Sanremo steering wheel

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 16 mai 2020 08:54

This is a really nice equipped MX-5 NC 2.0L. The car got some Recaro Pole Position mounted on our new developed seat brackets in combination with our new roll bar for the MX-5 NC and a 4-point harness. The car also got our SPS coilover setup, H&R anti-roll-bars, 17" OZ Ultraleggeras with Nankang NS-2R, a CarbonMiata Ducktail and a CAE Ultra Shifter.

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 24 juil. 2020 10:55

Hey folks,

the last post was a few weeks ago. Now I have something new for You.

As You may know not only our customers drive MX-5s/Miatas, also some of our employees have them.

This is the car from our professional for all body work. It got a full Carbonmiata widebody kit which he installed by himself. The car also has a TD04 turbo conversion on its 1.8L BP making 250hp at the flywheel. To get the wheels (10,5x15 -13mm offset) fitted under the fenders he also installed camber arms on the rear axle together with our own SPS Super Low coilover setup. In the interior he installed a pair of Bride Low Maxx seats.

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Nelson76
Pilote novice
Messages : 56
Enregistré le : 06 juil. 2020 21:04
Localisation : Paris 93

Re: SPS Motorsport

Message par Nelson76 » 30 août 2020 21:28

Too beautiful the Mx5
I would like to know if SPS Motorsport make performance parts for Mazda 3 2014-2018
Kind of like Corksport
Mazda 3 2015 Red soul bva 120ch

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 31 août 2020 08:37

Hi Nelson76,

at the moment we do not have parts for the Mazda 3 BM, but in the future there will come something.

Best regards
Guido from SPS

Nelson76
Pilote novice
Messages : 56
Enregistré le : 06 juil. 2020 21:04
Localisation : Paris 93

Re: SPS Motorsport

Message par Nelson76 » 31 août 2020 18:51

Thank you, look forward to the development of parts for Mazda 3 anyway.

Very nice Mx5
Mazda 3 2015 Red soul bva 120ch

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 25 nov. 2021 11:02

Hey guys,

i hope it is ok that i do a little advertisement.

Tomorrow we have Black Friday and we have several new products in our shop. All of them will have a 12% discount on this day.

Our new turboconversions, ITB conversions, Duratec conversions, etc. and also many other products come with a TÜV certificate, so maybe there is something interesting for You.

If You have questions, just write here or write me an email on guido.sikora@sps-motorsport.com

Image

Avatar du membre
ANSYL
Pilote débutant
Messages : 145
Enregistré le : 16 nov. 2016 20:55
Localisation : Suisse

Re: SPS Motorsport

Message par ANSYL » 25 nov. 2021 19:16

Hi Guido !
Great, thanks for this news !!!
Mazda 3 MPS quasiment stock
Subaru WRX Rex plus vraiment stock :twisted:

Avatar du membre
Guido@SPS
Pilote novice
Messages : 48
Enregistré le : 07 mai 2019 16:25
Contact :

Re: SPS Motorsport

Message par Guido@SPS » 21 nov. 2023 09:27

Hey people,

we have a Black Friday discount campaign in the shop on November 24th, 2023. Maybe there is something there for one or the other. ;)

The code is then SPSBF2023

Image

Répondre

Retourner vers « ..: Mazda en course :.. »